日本SMC大流量型油雾器参考书
减少相对运动件间的摩擦力,
2、减少密封材料的磨损,以防止泄漏,
3、防止管道及金属零部件的腐蚀,延长元件使用寿命..
不给油润滑：采用橡胶材料作为滑动部位的密封件，密封件带有滞留槽结构内存润滑脂来润滑。
喷油润滑：有油雾器和集中润滑元件两种。.
注意事项：
1、不给油润滑元件也可给油润滑，一旦给油，中途不得停止供油。
2、不要使用锭子油和机油，以免使密封件膨胀。.
 不给油润滑已很普遍，而给油润滑逐渐减少。
将润滑油进行雾化并注入空气流中,随压缩空气流入需要润滑的部位,达到润滑的目的..

日本SMC大流量型油雾器参考书
When the volume of oil reaches a certain
level, float e ascends, valve t descends via
lever r, nozzle w closes, and the feeding of
oil stops, thus completing the oil feeding
process. When the oil inside the case is
consumed, float e descends, valve t ascends
via lever r, allowing oil to be fedfrom nozzle w.
The oil that has been pumped from the tank
passes through felt q where it is filtered,
and is fed into the case through nozzle w.